5.5 hp petrol engine for sale horizontal shaft engine
model: YS168FC 5.5ph petrol engine price: 55 – 100USD
Horizontal shaft engine 5.5 hp petrol engine someone also call it 5 hp horizontal shaft engine, and it is also known as 168F engine, 168F is the standard model of horizontal shaft engine, 168F engine refers to a single-cylinder four-stroke horizontal output end 68mm bore air-cooled engine. Its power is 5.5-6.5 hp.
This horizontal shaft engine adopts overhead valve (OHV) design, low fuel consumption, excellent air filtration performance; the whole machine adopts high-quality materials, so that the performance of the engine is stronger and more stable, and the service life is longer. In addition, you can also consider it as quiet horizontal shaft engine, because we use high-quality muffler to effectively reduce noise and create a good working environment.
This horizontal shaft engine 5.5 hp petrol engine is small in size, light in weight, easy to operate, and has strong versatility for a wide range of horizontal shaft engine uses. It can provide power for a variety of agricultural machinery, garden machinery, construction machinery, etc., such as polishing machines, threshing machines, sprayers, generators, water pumps, micro tillers, hole punching machines, gasoline engine vibrating rods, etc. Horizontal shaft engine is an excellent choice for the majority of users.
Notice:
1) This horizontal shaft engine is recoil start, with low starting resistance, which can be easily started by both young and old, and an electric start design can also be added to make it become a horizontal shaft engine with electric start;
2) It is strictly forbidden to stop the engine quickly when the horizontal shaft engine is running at high speed and heavy load to avoid damage to the engine.
● Horizontal shaft engine (168F engine) technical parameters
| Engine type | Single cylinder、4-stroke、overhead valve |
| Bore × stroke(mm) | 68×45 |
| Displacement(ml) | 163 |
| Start mode | Recoil (electric start is optional) |
| Max. Output (HP/rpm) | 5.5/3600 |
| Max. Torque (N.m/rpm) | 9.0/2500 |
| Fuel designation | Unleaded gasoline above 90# (GB17930-1999） |
| Fuel designation | ≤395 |
| Fuel tank capacity(L) | 3.6 |
| Dimension L×W×H(mm) | 415×360×390 |
| Net Weight(kg) | 15.5 |
Notice:
1) The standard configuration of this horizontal shaft engine is recoil start. If you need electric start, you can inform us in advance to add an electric start design for you, to make it a horizontal shaft engine electric start;
2) The engine displacement of this 168F engine is 163cc, and it also has an upgraded version with a high power of 6.5HP, which is a 196cc engine, you can click to view the details.
● Horizontal shaft engine (168F engine) Structure diagram
● Advantages of Horizontal shaft engine
1) OHV structure with low energy consumption
The OHV overhead valve reduces carbon accumulation, the cylinder head inspection is simple, the external transistorized ignition system does not need electric shock inspection, simple equipment, high dust resistance, etc., make maintenance easier.
2) Carbide case
The box body made of advanced cemented carbide has the advantages of high efficiency, high-quality mechanical seal, fast heat dissipation, durable wear resistance and longer service life.
3) Lightweight and compact, easy to start
The thin hand-pulled recoil starter is adopted to realize lightness and compactness, and give full play to the excellent equipment. The hand-pulled recoil starter can also be easily started by women due to the pressure relief mechanism.
4) Long-lasting energy-saving, economical and fuel-saving
One fuel, twice the output, adopts advanced energy-saving technology that automatically adjusts the speed according to the size of the load, and automatically controls the power speed to reduce fuel consumption for everyone.
● Horizontal shaft engine use steps:
1. Check before starting
(Warning: Incorrect maintenance and failure to deal with the problems found before starting the horizontal shaft engine machines will cause the horizontal shaft engine to malfunction and cause serious damage to the engine. Therefore, the horizontal shaft engine machines must be checked and all problems solved before each start)
●Check the carburetor, oil seal, bottom, etc. to see if there is any oil leakage.
●Get rid of impurities around the horizontal shaft engine recoil starter, muffler, heat sink.
●Check the horizontal shaft engine appearance, all nuts, bolts and screws for looseness, and tighten if necessary.
●Check if the horizontal engine oil is below the safety line, the oil alarm system will stop shutting down if the horizontal engine oil is lower than the safety line.
2. Preparation before starting
1) Add horizontal engine oil Unscrew the oil dipstick, add an appropriate amount of oil from the oil filler port until the specified height, and then tighten the oil dipstick; the horizontal engine oil used is SAE 15 W/40 four-stroke gasoline lubricating oil.
2) Add fuel
Open the fuel tank cap and add fuel from the fuel filler port (93# unleaded gasoline is recommended) until the specified height.
3) Start
● Move the fuel switch to the ON position
● When starting the cold engine gasoline engine, turn the throttle handle to the off position; when starting the gasoline engine in the warm engine state, move the throttle handle from low speed to high speed by about 1/3
● Rotate the gasoline engine switch to the ON position
● Gently pull the starter handle until you feel resistance, pull it hard and quickly, and then slowly put it back on the handle
4) Shut down the horizontal shaft engine
● Put the throttle handle plate to the low-speed position
● Turn the petrol switch to the OFF position
● Turn off the fuel switch
Warning: It is strictly forbidden to stop quickly when the horizontal shaft engine is running at high speed and heavy load to avoid damage to the machine parts.
The horizontal shaft engine is light in weight, low in noise during operation, easy to start, it is cheap horizontal shaft engine and low in maintenance costs, and is a good choice for the majority of users.
● Horizontal shaft engine projects
Most of our horizontal shaft engine are very versatile and have a wide range of horizontal shaft engine uses, you can see horizontal shaft engine on bike, horizontal shaft engine boat, even can be use as go kart horizontal shaft engine etc. As long as the equipment is driven by a pulley, horizontal shaft engine can be used as power, such as polishing machines, threshing machines, sprayers, water pumps, micro-tillers, and punching machines, gasoline engine vibrators, boats, etc.
● About us
We are a professional manufacturer of general purposes horizontal shaft engine and have variety horizontal shaft engine for sale to power your machines. Except this 5.5 hp petrol engine, we also have other horizontal shaft engine styles for you to choose from, such as 8 hp horizontal shaft engine electric start, 9ph petrol engine, 10 hp horizontal shaft engine for sale, 13 hp horizontal shaft engine electric start, 18 hp horizontal shaft engine for sale and so on.
We sell related accessories for horizontal shaft engine, such as horizontal shaft engine clutch, horizontal shaft engine recoil starter, gearbox for horizontal shaft engine etc. Welcome to contact us for more details.
● Related information
● Horizontal shaft engine definition
Horizontal shaft engine means the engine which the drive shaft on one side and operate with the axis of the crankshaft in a horizontal position.
● Horizontal shaft engine (168F engine) Model meaning description:
The 168F engine is a standard horizontal shaft engine model. In "168F", "1" means that the horizontal shaft engine has only one cylinder, which is what we call a single cylinder; “68” means the cylinder diameter, indicating that the diameter of the cylinder of the gasoline engine is 68mm; "F" means that the gasoline cooling is air cooling, the first letter of the pinyin "feng". Combined, it is a single-cylinder four-stroke horizontal output 68mm bore air-cooled engine.
There is actually a code between “1” and “68”, but the status of the ordinary four-stroke engine is not marked (for example, V stands for V-twin cylinder, P stands for vertical output, E stands for two-stroke)
